[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu 2.6.27-7.16-generic) [ 0.000000] Command line: root=UUID=3153e286-67c9-418a-9313-2dfebe01d641 ro console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000001000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000c0000 - 00000000000f0000 (usable) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable) [ 0.000000] last_pfn = 0x80000 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 0080000000 page 2M [ 0.000000] kernel direct mapping tables up to 80000000 @ 8000-b000 [ 0.000000] last_map_addr: 80000000 end: 80000000 [ 0.000000] RAMDISK: 7f428000 - 7fc622a3 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080609] [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000080000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000080000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [0000000000009000 - 0000000000018fff] pages 10 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0080000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [007f428000 - 007fc622a3] RAMDISK ==> [007f428000 - 007fc622a3] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000] [ 0.000000] found SMP MP-table at [ffff880000000010] 00000010 [ 0.000000] [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x000000a0 [ 0.000000] 0: 0x000000c0 -> 0x000000f0 [ 0.000000] 0: 0x00000100 -> 0x00080000 [ 0.000000] On node 0 totalpages: 524239 [ 0.000000] DMA zone: 2160 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 512064 pages, LIFO batch:31 [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: GIGABYTE [ 0.000000] MPTABLE: Product ID: M57SLI [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #2 Version 17 at 0xFC244000. [ 0.000000] Setting APIC routing to flat [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000c0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:80000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514224 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=3153e286-67c9-418a-9313-2dfebe01d641 ro console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: Using PIT calibration value [ 0.000000] Detected 1999.988 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ f8000000 size 64 MB [ 0.004000] Memory: 2048388k/2097152k available (3112k kernel code, 48568k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.97 BogoMIPS (lpj=7999952) [ 0.012025] Security Framework initialized [ 0.016008] SELinux: Disabled at boot. [ 0.020018] AppArmor: AppArmor initialized [ 0.024212] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.029125] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.032482] Mount-cache hash table entries: 256 [ 0.036173] Initializing cgroup subsys ns [ 0.040007] Initializing cgroup subsys cpuacct [ 0.044006] Initializing cgroup subsys memory [ 0.048018] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.052006] CPU: L2 Cache: 512K (64 bytes/line) [ 0.056006] CPU 0/0 -> Node 0 [ 0.059021] tseg: 0000000000 [ 0.059034] CPU: Physical Processor ID: 0 [ 0.060006] CPU: Processor Core ID: 0 [ 0.064013] using C1E aware idle routine [ 0.072013] ACPI: Core revision 20080609 [ 0.076036] ACPI Exception (tbxface-0627): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20080609] [ 0.085199] ACPI: Unable to load the System Description Tables [ 0.088448] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.135243] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.141291] Using local APIC timer interrupts. [ 0.148010] APIC timer calibration result 12499957 [ 0.148012] Detected 12.499 MHz APIC timer. [ 0.152178] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4000.03 BogoMIPS (lpj=8000065) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.244216] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.253310] Brought up 2 CPUs [ 0.256018] Total of 2 processors activated (8000.00 BogoMIPS). [ 0.260088] CPU0 attaching sched-domain: [ 0.260091] domain 0: span 0-1 level CPU [ 0.260094] groups: 0 1 [ 0.260098] domain 1: span 0-1 level NODE [ 0.260100] groups: 0-1 [ 0.260105] CPU1 attaching sched-domain: [ 0.260106] domain 0: span 0-1 level CPU [ 0.260108] groups: 1 0 [ 0.260112] domain 1: span 0-1 level NODE [ 0.260114] groups: 0-1 [ 0.260205] net_namespace: 1552 bytes [ 0.264022] Booting paravirtualized kernel on bare hardware [ 0.268185] Time: 20:09:49 Date: 04/07/09 [ 0.272053] NET: Registered protocol family 16 [ 0.276050] node 0 link 0: io port [1000, 4fff] [ 0.276050] TOM: 0000000080000000 aka 2048M [ 0.280021] node 0 link 0: mmio [a0000, bffff] [ 0.280023] node 0 link 0: mmio [fc000000, fc2fffff] [ 0.280026] node 0 link 0: mmio [e8000000, f7ffffff] [ 0.280028] TOM2: 0000000000000000 aka 0M [ 0.284019] bus: [00,07] on node 0 link 0 [ 0.284021] bus: 00 index 0 io port: [0, ffff] [ 0.284023] bus: 00 index 1 mmio: [a0000, bffff] [ 0.284025] bus: 00 index 2 mmio: [f8000000, ffffffff] [ 0.284027] bus: 00 index 3 mmio: [80000000, f7ffffff] [ 0.284280] PCI: Using configuration type 1 for base access [ 0.288061] ACPI: Interpreter disabled. [ 0.292023] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.296039] pnp: PnP ACPI: disabled [ 0.300044] PCI: Probing PCI hardware [ 0.304021] PCI: Probing PCI hardware (bus 00) [ 0.304152] PCI: 0000:00:01.0 reg 14 32bit mmio: [fc244000, fc244fff] [ 0.304164] HPET not enabled in BIOS. You might try hpet=force boot option [ 0.308043] PCI: 0000:00:01.1 reg 10 io port: [3c00, 3c3f] [ 0.308054] PCI: 0000:00:01.1 reg 20 io port: [3c40, 3c7f] [ 0.308059] PCI: 0000:00:01.1 reg 24 io port: [3c80, 3cbf] [ 0.308075] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.312024] pci 0000:00:01.1: PME# disabled [ 0.316043] PCI: 0000:00:01.3 reg 10 32bit mmio: [fc200000, fc23ffff] [ 0.316118] PCI: 0000:00:02.0 reg 10 32bit mmio: [fc245000, fc245fff] [ 0.316137] pci 0000:00:02.0: supports D1 [ 0.316139] pci 0000:00:02.0: supports D2 [ 0.316141] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.320022] pci 0000:00:02.0: PME# disabled [ 0.324038] PCI: 0000:00:02.1 reg 10 32bit mmio: [fc24a000, fc24a0ff] [ 0.324058] pci 0000:00:02.1: supports D1 [ 0.324059] pci 0000:00:02.1: supports D2 [ 0.324061] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.328023] pci 0000:00:02.1: PME# disabled [ 0.332044] PCI: 0000:00:04.0 reg 20 io port: [3cc0, 3ccf] [ 0.332071] PCI: 0000:00:05.0 reg 10 io port: [4000, 4007] [ 0.332075] PCI: 0000:00:05.0 reg 14 io port: [4070, 4073] [ 0.332078] PCI: 0000:00:05.0 reg 18 io port: [4010, 4017] [ 0.332082] PCI: 0000:00:05.0 reg 1c io port: [4080, 4083] [ 0.332086] PCI: 0000:00:05.0 reg 20 io port: [3cd0, 3cdf] [ 0.332090] PCI: 0000:00:05.0 reg 24 32bit mmio: [fc246000, fc246fff] [ 0.332116] PCI: 0000:00:05.1 reg 10 io port: [4020, 4027] [ 0.332120] PCI: 0000:00:05.1 reg 14 io port: [4090, 4093] [ 0.332124] PCI: 0000:00:05.1 reg 18 io port: [4030, 4037] [ 0.332128] PCI: 0000:00:05.1 reg 1c io port: [40a0, 40a3] [ 0.332131] PCI: 0000:00:05.1 reg 20 io port: [3ce0, 3cef] [ 0.332135] PCI: 0000:00:05.1 reg 24 32bit mmio: [fc247000, fc247fff] [ 0.332162] PCI: 0000:00:05.2 reg 10 io port: [4040, 4047] [ 0.332166] PCI: 0000:00:05.2 reg 14 io port: [40b0, 40b3] [ 0.332169] PCI: 0000:00:05.2 reg 18 io port: [4050, 4057] [ 0.332173] PCI: 0000:00:05.2 reg 1c io port: [40c0, 40c3] [ 0.332177] PCI: 0000:00:05.2 reg 20 io port: [3cf0, 3cff] [ 0.332181] PCI: 0000:00:05.2 reg 24 32bit mmio: [fc248000, fc248fff] [ 0.332237] PCI: 0000:00:06.1 reg 10 32bit mmio: [fc240000, fc243fff] [ 0.332258] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.336023] pci 0000:00:06.1: PME# disabled [ 0.340050] PCI: 0000:00:08.0 reg 10 32bit mmio: [fc249000, fc249fff] [ 0.340054] PCI: 0000:00:08.0 reg 14 io port: [4060, 4067] [ 0.340058] PCI: 0000:00:08.0 reg 18 32bit mmio: [fc24b000, fc24b0ff] [ 0.340062] PCI: 0000:00:08.0 reg 1c 32bit mmio: [fc24c000, fc24c00f] [ 0.340079] pci 0000:00:08.0: supports D1 [ 0.340081] pci 0000:00:08.0: supports D2 [ 0.340083] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.344025] pci 0000:00:08.0: PME# disabled [ 0.348047] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.352024] pci 0000:00:0a.0: PME# disabled [ 0.356048] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.360024] pci 0000:00:0b.0: PME# disabled [ 0.364047] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.368025] pci 0000:00:0c.0: PME# disabled [ 0.372047] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.376025] pci 0000:00:0d.0: PME# disabled [ 0.380048] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.384026] pci 0000:00:0e.0: PME# disabled [ 0.388048] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.392026] pci 0000:00:0f.0: PME# disabled [ 0.396126] PCI: 0000:01:07.0 reg 10 32bit mmio: [e8000000, efffffff] [ 0.396131] PCI: 0000:01:07.0 reg 14 io port: [1000, 10ff] [ 0.396137] PCI: 0000:01:07.0 reg 18 32bit mmio: [fc040000, fc04ffff] [ 0.396150] PCI: 0000:01:07.0 reg 30 32bit mmio: [fc000000, fc01ffff] [ 0.396160] pci 0000:01:07.0: supports D1 [ 0.396162] pci 0000:01:07.0: supports D2 [ 0.396180] PCI: 0000:01:07.1 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.396185] PCI: 0000:01:07.1 reg 14 32bit mmio: [fc050000, fc05ffff] [ 0.396209] pci 0000:01:07.1: supports D1 [ 0.396211] pci 0000:01:07.1: supports D2 [ 0.396234] PCI: 0000:01:08.0 reg 10 io port: [1400, 147f] [ 0.396239] PCI: 0000:01:08.0 reg 14 32bit mmio: [fc065000, fc06507f] [ 0.396255] PCI: 0000:01:08.0 reg 30 32bit mmio: [fc020000, fc03ffff] [ 0.396264] pci 0000:01:08.0: supports D1 [ 0.396266] pci 0000:01:08.0: supports D2 [ 0.396268] pci 0000:01:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.400027] pci 0000:01:08.0: PME# disabled [ 0.404047] PCI: 0000:01:0a.0 reg 10 32bit mmio: [fc064000, fc0647ff] [ 0.404053] PCI: 0000:01:0a.0 reg 14 32bit mmio: [fc060000, fc063fff] [ 0.404078] pci 0000:01:0a.0: supports D1 [ 0.404080] pci 0000:01:0a.0: supports D2 [ 0.404082] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.408028] pci 0000:01:0a.0: PME# disabled [ 0.412043] pci 0000:00:06.0: transparent bridge [ 0.416028] PCI: bridge 0000:00:06.0 io port: [1000, 1fff] [ 0.416031] PCI: bridge 0000:00:06.0 32bit mmio: [fc000000, fc0fffff] [ 0.416034] PCI: bridge 0000:00:06.0 32bit mmio pref: [e8000000, f7ffffff] [ 0.416066] PCI: 0000:02:00.0 reg 10 32bit mmio: [fc100000, fc11ffff] [ 0.416072] PCI: 0000:02:00.0 reg 14 32bit mmio: [fc120000, fc13ffff] [ 0.416078] PCI: 0000:02:00.0 reg 18 io port: [2000, 201f] [ 0.416094] PCI: 0000:02:00.0 reg 30 32bit mmio: [fc140000, fc15ffff] [ 0.416110] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.420029] pci 0000:02:00.0: PME# disabled [ 0.424051] PCI: 0000:02:00.1 reg 10 32bit mmio: [fc160000, fc17ffff] [ 0.424057] PCI: 0000:02:00.1 reg 14 32bit mmio: [fc180000, fc19ffff] [ 0.424063] PCI: 0000:02:00.1 reg 18 io port: [2020, 203f] [ 0.424079] PCI: 0000:02:00.1 reg 30 32bit mmio: [fc1a0000, fc1bffff] [ 0.424095] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.428029] pci 0000:02:00.1: PME# disabled [ 0.432059] PCI: bridge 0000:00:0a.0 io port: [2000, 2fff] [ 0.432062] PCI: bridge 0000:00:0a.0 32bit mmio: [fc100000, fc1fffff] [ 0.432263] pci 0000:00:06.0: default IRQ router [10de/0370] [ 0.436055] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.440030] pci 0000:00:02.1: PCI->APIC IRQ transform: INT B -> IRQ 23 [ 0.444031] pci 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.448030] pci 0000:00:05.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.452032] pci 0000:00:05.2: PCI->APIC IRQ transform: INT C -> IRQ 20 [ 0.456032] pci 0000:00:06.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.460031] pci 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.464039] pci 0000:01:07.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 0.468033] pci 0000:01:08.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.472032] pci 0000:01:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.476032] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.480033] pci 0000:02:00.1: PCI->APIC IRQ transform: INT B -> IRQ 16 [ 0.500039] NET: Registered protocol family 8 [ 0.504033] NET: Registered protocol family 20 [ 0.508051] NetLabel: Initializing [ 0.512032] NetLabel: domain hash size = 128 [ 0.516032] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.520046] NetLabel: unlabeled traffic allowed by default [ 0.528976] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 0.532032] actual entries 65586 [ 0.536157] AppArmor: AppArmor Filesystem Enabled [ 0.544104] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 0.548034] pci 0000:00:06.0: IO window: 0x1000-0x1fff [ 0.552034] pci 0000:00:06.0: MEM window: 0xfc000000-0xfc0fffff [ 0.556034] pci 0000:00:06.0: PREFETCH window: 0x000000e8000000-0x000000f7ffffff [ 0.560034] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.564033] pci 0000:00:0a.0: IO window: 0x2000-0x2fff [ 0.568034] pci 0000:00:0a.0: MEM window: 0xfc100000-0xfc1fffff [ 0.572033] pci 0000:00:0a.0: PREFETCH window: disabled [ 0.576034] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.580032] pci 0000:00:0b.0: IO window: disabled [ 0.584033] pci 0000:00:0b.0: MEM window: disabled [ 0.588033] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.592034] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.596032] pci 0000:00:0c.0: IO window: disabled [ 0.600033] pci 0000:00:0c.0: MEM window: disabled [ 0.604033] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.608034] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 0.612033] pci 0000:00:0d.0: IO window: disabled [ 0.616033] pci 0000:00:0d.0: MEM window: disabled [ 0.620033] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.624034] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:06 [ 0.628032] pci 0000:00:0e.0: IO window: disabled [ 0.632033] pci 0000:00:0e.0: MEM window: disabled [ 0.636033] pci 0000:00:0e.0: PREFETCH window: disabled [ 0.640034] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:07 [ 0.644032] pci 0000:00:0f.0: IO window: disabled [ 0.648033] pci 0000:00:0f.0: MEM window: disabled [ 0.652033] pci 0000:00:0f.0: PREFETCH window: disabled [ 0.656039] pci 0000:00:06.0: setting latency timer to 64 [ 0.656045] pci 0000:00:0a.0: setting latency timer to 64 [ 0.656050] pci 0000:00:0b.0: setting latency timer to 64 [ 0.656055] pci 0000:00:0c.0: setting latency timer to 64 [ 0.656061] pci 0000:00:0d.0: setting latency timer to 64 [ 0.656066] pci 0000:00:0e.0: setting latency timer to 64 [ 0.656071] pci 0000:00:0f.0: setting latency timer to 64 [ 0.656075] bus: 00 index 0 io port: [0, ffff] [ 0.660033] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 0.664033] bus: 01 index 0 io port: [1000, 1fff] [ 0.668032] bus: 01 index 1 mmio: [fc000000, fc0fffff] [ 0.672032] bus: 01 index 2 mmio: [e8000000, f7ffffff] [ 0.676032] bus: 01 index 3 io port: [0, ffff] [ 0.680032] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 0.684033] bus: 02 index 0 io port: [2000, 2fff] [ 0.688032] bus: 02 index 1 mmio: [fc100000, fc1fffff] [ 0.692032] bus: 02 index 2 mmio: [0, 0] [ 0.696032] bus: 02 index 3 mmio: [0, 0] [ 0.700032] bus: 03 index 0 mmio: [0, 0] [ 0.704032] bus: 03 index 1 mmio: [0, 0] [ 0.708035] bus: 03 index 2 mmio: [0, 0] [ 0.712032] bus: 03 index 3 mmio: [0, 0] [ 0.716032] bus: 04 index 0 mmio: [0, 0] [ 0.720032] bus: 04 index 1 mmio: [0, 0] [ 0.724032] bus: 04 index 2 mmio: [0, 0] [ 0.728032] bus: 04 index 3 mmio: [0, 0] [ 0.732032] bus: 05 index 0 mmio: [0, 0] [ 0.736032] bus: 05 index 1 mmio: [0, 0] [ 0.740034] bus: 05 index 2 mmio: [0, 0] [ 0.744032] bus: 05 index 3 mmio: [0, 0] [ 0.748032] bus: 06 index 0 mmio: [0, 0] [ 0.752032] bus: 06 index 1 mmio: [0, 0] [ 0.756032] bus: 06 index 2 mmio: [0, 0] [ 0.760032] bus: 06 index 3 mmio: [0, 0] [ 0.764009] bus: 07 index 0 mmio: [0, 0] [ 0.764032] bus: 07 index 1 mmio: [0, 0] [ 0.768035] bus: 07 index 2 mmio: [0, 0] [ 0.772032] bus: 07 index 3 mmio: [0, 0] [ 0.776044] NET: Registered protocol family 2 [ 0.836144] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.844240] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.853661] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.856511] TCP: Hash tables configured (established 262144 bind 65536) [ 0.860034] TCP reno registered [ 0.876125] NET: Registered protocol family 1 [ 0.880147] checking if image is initramfs... it is [ 1.598101] Freeing initrd memory: 8424k freed [ 1.606416] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 1.608366] audit: initializing netlink socket (disabled) [ 1.612045] type=2000 audit(1239134989.612:1): initialized [ 1.624065] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.632232] VFS: Disk quotas dquot_6.5.1 [ 1.636090] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.644157] msgmni has been set to 4017 [ 1.648096] io scheduler noop registered [ 1.652033] io scheduler anticipatory registered [ 1.656072] io scheduler deadline registered [ 1.660074] io scheduler cfq registered (default) [ 1.664163] pci 0000:00:05.0: Enabling HT MSI Mapping [ 1.668047] pci 0000:00:05.1: Enabling HT MSI Mapping [ 1.672046] pci 0000:00:05.2: Enabling HT MSI Mapping [ 1.676045] pci 0000:00:06.0: Enabling HT MSI Mapping [ 1.680047] pci 0000:00:06.1: Enabling HT MSI Mapping [ 1.684049] pci 0000:00:08.0: Enabling HT MSI Mapping [ 1.688047] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 1.692047] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 1.696047] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 1.700047] pci 0000:00:0d.0: Enabling HT MSI Mapping [ 1.704047] pci 0000:00:0e.0: Enabling HT MSI Mapping [ 1.708047] pci 0000:00:0f.0: Enabling HT MSI Mapping [ 1.712041] pci 0000:01:07.0: Boot video device [ 1.712115] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 1.712115] pcieport-driver 0000:00:0a.0: found MSI capability [ 1.716051] pci_express 0000:00:0a.0:pcie00: allocate port service [ 1.716071] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 1.716084] pcieport-driver 0000:00:0b.0: found MSI capability [ 1.720048] pci_express 0000:00:0b.0:pcie00: allocate port service [ 1.720064] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 1.720080] pcieport-driver 0000:00:0c.0: found MSI capability [ 1.724046] pci_express 0000:00:0c.0:pcie00: allocate port service [ 1.724062] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 1.724080] pcieport-driver 0000:00:0d.0: found MSI capability [ 1.728046] pci_express 0000:00:0d.0:pcie00: allocate port service [ 1.728061] pcieport-driver 0000:00:0e.0: setting latency timer to 64 [ 1.728080] pcieport-driver 0000:00:0e.0: found MSI capability [ 1.732049] pci_express 0000:00:0e.0:pcie00: allocate port service [ 1.732064] pcieport-driver 0000:00:0f.0: setting latency timer to 64 [ 1.732080] pcieport-driver 0000:00:0f.0: found MSI capability [ 1.736046] pci_express 0000:00:0f.0:pcie00: allocate port service [ 1.776339] Linux agpgart interface v0.103 [ 1.780036] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.784376] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.792104] brd: module loaded [ 1.796067] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 1.804064] PNP: No PS/2 controller found. Probing ports directly. [ 1.808137] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.812037] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.844084] mice: PS/2 mouse device common for all mice [ 1.848125] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.856057] rtc0: alarms up to one day [ 1.868104] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 1.892081] cpuidle: using governor ladder [ 1.896039] cpuidle: using governor menu [ 1.900415] TCP cubic registered [ 1.904192] registered taskstats version 1 [ 1.908200] Magic number: 5:251:194 [ 1.912070] tty ttys6: hash matches [ 1.916125] rtc_cmos rtc_cmos: setting system clock to 2009-04-07 20:09:51 UTC (1239134991) [ 1.924033] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.928032] EDD information not available. [ 1.932057] Freeing unused kernel memory: 536k freed [ 1.940270] Write protecting the kernel read-only data: 4348k [ 2.070526] fuse init (API version 7.9) [ 2.145420] thermal: Unknown symbol acpi_processor_set_thermal_limit [ 2.248449] usbcore: registered new interface driver usbfs [ 2.252060] usbcore: registered new interface driver hub [ 2.262740] usbcore: registered new device driver usb [ 2.281766] SCSI subsystem initialized [ 2.282606] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.282606] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.288092] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.296152] ehci_hcd 0000:00:02.1: debug port 1 [ 2.304035] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.304048] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfc24a000 [ 2.325799] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 2.332174] usb usb1: configuration #1 chosen from 1 choice [ 2.340042] hub 1-0:1.0: USB hub found [ 2.344025] hub 1-0:1.0: 10 ports detected [ 2.348871] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.353766] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 2.360043] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.395490] libata version 3.00 loaded. [ 2.452767] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.452767] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.456065] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.464053] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc245000 [ 2.530277] usb usb2: configuration #1 chosen from 1 choice [ 2.536066] hub 2-0:1.0: USB hub found [ 2.540073] hub 2-0:1.0: 10 ports detected [ 2.648488] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 2.648596] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 2.648670] sata_nv 0000:00:05.0: version 3.5 [ 2.648680] sata_nv 0000:00:05.0: Using SWNCQ mode [ 2.652079] sata_nv 0000:00:05.0: setting latency timer to 64 [ 2.652219] scsi0 : sata_nv [ 2.656273] scsi1 : sata_nv [ 2.660073] ata1: SATA max UDMA/133 cmd 0x4000 ctl 0x4070 bmdma 0x3cd0 irq 22 [ 2.664034] ata2: SATA max UDMA/133 cmd 0x4010 ctl 0x4080 bmdma 0x3cd8 irq 22 [ 3.480058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.500124] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 3.504035] ata1.00: ATA-6: WDC WD2500SD-01KCB0, 08.02D08, max UDMA/133 [ 3.512033] ata1.00: 488397168 sectors, multi 0: LBA48 [ 3.520038] ata1.00: Drive reports diagnostics failure. This may indicate a drive [ 3.528032] ata1.00: fault or invalid emulation. Contact drive vendor for information. [ 3.552165] ata1.00: configured for UDMA/133 [ 3.884036] ata2: SATA link down (SStatus 0 SControl 300) [ 3.892066] isa bounce pool size: 16 pages [ 3.896110] scsi 0:0:0:0: Direct-Access ATA WDC WD2500SD-01K 08.0 PQ: 0 ANSI: 5 [ 3.901584] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 3.901589] sata_nv 0000:00:05.1: Using SWNCQ mode [ 3.908066] sata_nv 0000:00:05.1: setting latency timer to 64 [ 3.908154] scsi2 : sata_nv [ 3.912197] scsi3 : sata_nv [ 3.916182] ata3: SATA max UDMA/133 cmd 0x4020 ctl 0x4090 bmdma 0x3ce0 irq 21 [ 3.920033] ata4: SATA max UDMA/133 cmd 0x4030 ctl 0x40a0 bmdma 0x3ce8 irq 21 [ 4.252036] ata3: SATA link down (SStatus 0 SControl 300) [ 4.588035] ata4: SATA link down (SStatus 0 SControl 300) [ 4.596103] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 4.596118] sata_nv 0000:00:05.2: Using SWNCQ mode [ 4.600074] sata_nv 0000:00:05.2: setting latency timer to 64 [ 4.600161] scsi4 : sata_nv [ 4.605164] scsi5 : sata_nv [ 4.609056] ata5: SATA max UDMA/133 cmd 0x4040 ctl 0x40b0 bmdma 0x3cf0 irq 20 [ 4.612034] ata6: SATA max UDMA/133 cmd 0x4050 ctl 0x40c0 bmdma 0x3cf8 irq 20 [ 4.944036] ata5: SATA link down (SStatus 0 SControl 300) [ 5.280035] ata6: SATA link down (SStatus 0 SControl 300) [ 5.288061] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 5.296047] forcedeth 0000:00:08.0: setting latency timer to 64 [ 5.296078] nv_probe: set workaround bit for reversed mac addr [ 5.816519] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:8c:ac:d5 [ 5.824034] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 5.836401] e1000e 0000:02:00.0: setting latency timer to 64 [ 5.836596] 3c59x: Donald Becker and others. [ 5.840036] 0000:01:08.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffc200008a2000. [ 5.931249] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fc064000-fc0647ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.046702] 0000:02:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:15:17:0b:d4:9e [ 6.048033] 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 6.052107] 0000:02:00.0: eth2: MAC: 0, PHY: 4, PBA No: d50868-001 [ 6.056080] e1000e 0000:02:00.1: setting latency timer to 64 [ 6.239283] 0000:02:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:15:17:0b:d4:9f [ 6.244035] 0000:02:00.1: eth3: Intel(R) PRO/1000 Network Connection [ 6.252107] 0000:02:00.1: eth3: MAC: 0, PHY: 4, PBA No: d50868-001 [ 6.269282] pata_amd 0000:00:04.0: version 0.3.10 [ 6.269326] pata_amd 0000:00:04.0: setting latency timer to 64 [ 6.274657] scsi6 : pata_amd [ 6.276136] scsi7 : pata_amd [ 6.280088] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3cc0 irq 14 [ 6.284033] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3cc8 irq 15 [ 6.288031] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.311611] Driver 'sd' needs updating - please use bus_type methods [ 6.316153] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 6.324086] sd 0:0:0:0: [sda] Write Protect is off [ 6.328049] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.328086] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.332111] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 6.336047] sd 0:0:0:0: [sda] Write Protect is off [ 6.340033] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.340463] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.344036] sda: sda1 sda2 < sda5 > [ 6.389191] sd 0:0:0:0: [sda] Attached SCSI disk [ 6.452311] ata7.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66 [ 6.456040] ata7: nv_mode_filter: 0x1f39f&0xfffff->0x1f39f, BIOS=0x0 (0x0) ACPI=0x0 [ 6.472243] ata7.00: configured for UDMA/66 [ 6.476063] ata8: port disabled. ignoring. [ 6.480276] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5 [ 6.486092] scsi 6:0:0:0: Attached scsi generic sg1 type 5 [ 6.511708] Driver 'sr' needs updating - please use bus_type methods [ 6.536112] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 6.544035] Uniform CD-ROM driver Revision: 3.20 [ 6.548154] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 6.708797] PM: Starting manual resume from disk [ 6.712034] PM: Resume from partition 8:5 [ 6.712036] PM: Checking hibernation image. [ 6.712115] PM: Resume from disk failed. [ 6.768054] kjournald starting. Commit interval 5 seconds [ 6.772042] EXT3-fs: mounted filesystem with ordered data mode. [ 12.540907] udevd version 124 started [ 12.952207] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 13.023745] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 13.144540] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3c40 [ 13.148096] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3c80 [ 13.516450] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 13.911625] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 13.942908] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 14.437915] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input3 [ 44.498308] lp: driver loaded but no devices found [ 44.709311] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k [ 44.984286] EXT3 FS on sda1, internal journal [ 45.388121] type=1505 audit(1239135035.008:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=3757 [ 45.553738] type=1505 audit(1239135035.172:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=3762 [ 45.553946] type=1505 audit(1239135035.172:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3762 [ 45.662662] ip_tables: (C) 2000-2006 Netfilter Core Team [ 46.284627] powernow_k8: Unknown symbol acpi_processor_notify_smm [ 46.284714] powernow_k8: Unknown symbol acpi_processor_unregister_performance [ 46.284956] powernow_k8: Unknown symbol acpi_processor_register_performance [ 46.325455] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm [ 46.325455] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance [ 46.325455] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance [ 46.325467] acpi_cpufreq: Unknown symbol acpi_processor_register_performance [ 47.193325] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 47.572215] NET: Registered protocol family 10 [ 47.573606] lo: Disabled Privacy Extensions [ 47.865774] ppdev: user-space parallel port driver [ 48.773095] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard [ 48.776050] KQEMU installed, max_locked_mem=1028676kB. [ 49.822384] Bluetooth: Core ver 2.13 [ 49.824354] NET: Registered protocol family 31 [ 49.824354] Bluetooth: HCI device and connection manager initialized [ 49.824354] Bluetooth: HCI socket layer initialized [ 49.834625] Bluetooth: L2CAP ver 2.11 [ 49.834625] Bluetooth: L2CAP socket layer initialized [ 49.849600] Bluetooth: SCO (Voice Link) ver 0.6 [ 49.849600] Bluetooth: SCO socket layer initialized [ 49.857765] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 49.857765] Bluetooth: BNEP filters: protocol multicast [ 49.899523] Bridge firewalling registered [ 49.900975] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 49.920905] Bluetooth: RFCOMM socket layer initialized [ 49.921539] Bluetooth: RFCOMM TTY layer initialized [ 49.921544] Bluetooth: RFCOMM ver 1.10 [ 51.334995] [drm] Initialized drm 1.1.0 20060810 [ 51.366088] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 54.244877] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 54.444865] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 54.450121] eth1_rename: setting half-duplex. [ 54.450719] ADDRCONF(NETDEV_UP): eth1_rename: link is not ready [ 54.601461] NET: Registered protocol family 17 [ 64.998285] eth0: no IPv6 routers present [ 84.004813] [drm] Setting GART location based on new memory map [ 84.005060] [drm] Loading R200 Microcode [ 84.005162] [drm] writeback test succeeded in 1 usecs [ 120.962327] [drm] Setting GART location based on new memory map [ 120.962568] [drm] Loading R200 Microcode [ 120.962670] [drm] writeback test succeeded in 1 usecs [ 157.560018] [drm] Setting GART location based on new memory map [ 157.560254] [drm] Loading R200 Microcode [ 157.560356] [drm] writeback test succeeded in 1 usecs