[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.27-7-generic (buildd@crested) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Tue Nov 4 19:33:06 UTC 2008 (Ubuntu 2.6.27-7.16-generic) [ 0.000000] Command line: root=UUID=3153e286-67c9-418a-9313-2dfebe01d641 ro console=tty0 console=ttyS0,115200n8 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e8000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x3ffffffff [ 0.000000] init_memory_mapping [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007fff0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 8000-c000 [ 0.000000] last_map_addr: 7fff0000 end: 7fff0000 [ 0.000000] RAMDISK: 377b5000 - 37fef2a3 [ 0.000000] DMI not present or invalid. [ 0.000000] ACPI: RSDP 000F6640, 0014 (r0 GBT ) [ 0.000000] ACPI: RSDT 7FFF3000, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: FACP 7FFF3040, 0074 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: DSDT 7FFF30C0, 4C8E (r1 GBT NVDAACPI 1000 MSFT 100000C) [ 0.000000] ACPI: FACS 7FFF0000, 0040 [ 0.000000] ACPI: SSDT 7FFF7E40, 01C4 (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET 7FFF8040, 0038 (r1 GBT NVDAACPI 42302E31 NVDA 98) [ 0.000000] ACPI: MCFG 7FFF8080, 003C (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] ACPI: APIC 7FFF7D80, 0098 (r1 GBT NVDAACPI 42302E31 NVDA 1010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fff0000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fff0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff] [ 0.000000] bootmap [000000000000a000 - 0000000000019fff] pages 10 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fff0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 00008b8f9c] TEXT DATA BSS ==> [0000200000 - 00008b8f9c] [ 0.000000] #3 [00377b5000 - 0037fef2a3] RAMDISK ==> [00377b5000 - 0037fef2a3] [ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000f4cd0] 000f4cd0 [ 0.000000] [ffffe20000000000-ffffe20001ffffff] PMD -> [ffff880001200000-ffff8800031fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fff0 [ 0.000000] On node 0 totalpages: 524175 [ 0.000000] DMA zone: 2112 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 512048 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfefffc00 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:50000000) [ 0.000000] PERCPU: Allocating 64928 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514160 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=UUID=3153e286-67c9-418a-9313-2dfebe01d641 ro console=tty0 console=ttyS0,115200n8 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC: PIT calibration confirmed by PMTIMER. [ 0.000000] TSC: using PIT calibration value [ 0.000000] Detected 2010.281 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] console [ttyS0] enabled [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 7908000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 2048192k/2097088k available (3112k kernel code, 48508k reserved, 1575k data, 536k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.56 BogoMIPS (lpj=8041124) [ 0.012024] Security Framework initialized [ 0.016007] SELinux: Disabled at boot. [ 0.020015] AppArmor: AppArmor initialized [ 0.024202] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.029065] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.032462] Mount-cache hash table entries: 256 [ 0.036180] Initializing cgroup subsys ns [ 0.040006] Initializing cgroup subsys cpuacct [ 0.044006] Initializing cgroup subsys memory [ 0.048018] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.052005] CPU: L2 Cache: 512K (64 bytes/line) [ 0.056006] CPU 0/0 -> Node 0 [ 0.059019] tseg: 0000000000 [ 0.059031] CPU: Physical Processor ID: 0 [ 0.060006] CPU: Processor Core ID: 0 [ 0.064013] using C1E aware idle routine [ 0.072013] ACPI: Core revision 20080609 [ 0.077331] ACPI: Checking initramfs for custom DSDT [ 0.432507] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.479449] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.485312] Using local APIC timer interrupts. [ 0.492032] APIC timer calibration result 12564273 [ 0.492034] Detected 12.564 MHz APIC timer. [ 0.496192] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4020.65 BogoMIPS (lpj=8041319) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.588207] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 [ 0.597324] Brought up 2 CPUs [ 0.600033] Total of 2 processors activated (8041.22 BogoMIPS). [ 0.604093] CPU0 attaching sched-domain: [ 0.604096] domain 0: span 0-1 level CPU [ 0.604098] groups: 0 1 [ 0.604102] domain 1: span 0-1 level NODE [ 0.604105] groups: 0-1 [ 0.604110] CPU1 attaching sched-domain: [ 0.604112] domain 0: span 0-1 level CPU [ 0.604114] groups: 1 0 [ 0.604118] domain 1: span 0-1 level NODE [ 0.604120] groups: 0-1 [ 0.604205] net_namespace: 1552 bytes [ 0.608037] Booting paravirtualized kernel on bare hardware [ 0.612199] Time: 19:16:16 Date: 04/07/09 [ 0.616071] NET: Registered protocol family 16 [ 0.620059] node 0 link 0: io port [1000, fffff] [ 0.620059] TOM: 0000000080000000 aka 2048M [ 0.624034] node 0 link 0: mmio [e0000000, e7ffffff] [ 0.624037] node 0 link 0: mmio [a0000, bffff] [ 0.624039] node 0 link 0: mmio [80000000, ffb7ffff] [ 0.624042] bus: [00,ff] on node 0 link 0 [ 0.624044] bus: 00 index 0 io port: [0, ffff] [ 0.624046] bus: 00 index 1 mmio: [80000000, fcffffffff] [ 0.624048] bus: 00 index 2 mmio: [a0000, bffff] [ 0.624056] ACPI: bus type pci registered [ 0.628299] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 127 [ 0.632033] PCI: MCFG area at e0000000 reserved in E820 [ 0.644635] PCI: Using MMCONFIG at e0000000 - e7ffffff [ 0.648032] PCI: Using configuration type 1 for base access [ 0.656905] ACPI: EC: Look up EC in DSDT [ 0.666861] ACPI: Interpreter enabled [ 0.668036] ACPI: (supports S0 S1 S4 S5) [ 0.673321] ACPI: Using IOAPIC for interrupt routing [ 0.688736] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.692193] PCI: 0000:00:01.1 reg 10 io port: [e000, e03f] [ 0.692205] PCI: 0000:00:01.1 reg 20 io port: [1c00, 1c3f] [ 0.692209] PCI: 0000:00:01.1 reg 24 io port: [1c80, 1cbf] [ 0.692225] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.696037] pci 0000:00:01.1: PME# disabled [ 0.700053] PCI: 0000:00:02.0 reg 10 32bit mmio: [fc005000, fc005fff] [ 0.700073] pci 0000:00:02.0: supports D1 [ 0.700074] pci 0000:00:02.0: supports D2 [ 0.700076] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.704034] pci 0000:00:02.0: PME# disabled [ 0.708047] PCI: 0000:00:02.1 reg 10 32bit mmio: [fc006000, fc0060ff] [ 0.708067] pci 0000:00:02.1: supports D1 [ 0.708069] pci 0000:00:02.1: supports D2 [ 0.708071] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.712033] pci 0000:00:02.1: PME# disabled [ 0.716055] PCI: 0000:00:04.0 reg 20 io port: [f000, f00f] [ 0.716082] PCI: 0000:00:05.0 reg 10 io port: [a400, a407] [ 0.716086] PCI: 0000:00:05.0 reg 14 io port: [a800, a803] [ 0.716089] PCI: 0000:00:05.0 reg 18 io port: [ac00, ac07] [ 0.716093] PCI: 0000:00:05.0 reg 1c io port: [b000, b003] [ 0.716097] PCI: 0000:00:05.0 reg 20 io port: [b400, b40f] [ 0.716101] PCI: 0000:00:05.0 reg 24 32bit mmio: [fc007000, fc007fff] [ 0.716132] PCI: 0000:00:05.1 reg 10 io port: [b800, b807] [ 0.716136] PCI: 0000:00:05.1 reg 14 io port: [bc00, bc03] [ 0.716139] PCI: 0000:00:05.1 reg 18 io port: [c000, c007] [ 0.716143] PCI: 0000:00:05.1 reg 1c io port: [c400, c403] [ 0.716147] PCI: 0000:00:05.1 reg 20 io port: [c800, c80f] [ 0.716151] PCI: 0000:00:05.1 reg 24 32bit mmio: [fc00b000, fc00bfff] [ 0.716178] PCI: 0000:00:05.2 reg 10 io port: [cc00, cc07] [ 0.716182] PCI: 0000:00:05.2 reg 14 io port: [d000, d003] [ 0.716185] PCI: 0000:00:05.2 reg 18 io port: [d400, d407] [ 0.716189] PCI: 0000:00:05.2 reg 1c io port: [d800, d803] [ 0.716193] PCI: 0000:00:05.2 reg 20 io port: [dc00, dc0f] [ 0.716197] PCI: 0000:00:05.2 reg 24 32bit mmio: [fc004000, fc004fff] [ 0.716250] PCI: 0000:00:06.1 reg 10 32bit mmio: [fc000000, fc003fff] [ 0.716272] pci 0000:00:06.1: PME# supported from D3hot D3cold [ 0.720034] pci 0000:00:06.1: PME# disabled [ 0.724060] PCI: 0000:00:08.0 reg 10 32bit mmio: [fc008000, fc008fff] [ 0.724065] PCI: 0000:00:08.0 reg 14 io port: [e400, e407] [ 0.724069] PCI: 0000:00:08.0 reg 18 32bit mmio: [fc009000, fc0090ff] [ 0.724073] PCI: 0000:00:08.0 reg 1c 32bit mmio: [fc00a000, fc00a00f] [ 0.724090] pci 0000:00:08.0: supports D1 [ 0.724091] pci 0000:00:08.0: supports D2 [ 0.724093] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.728035] pci 0000:00:08.0: PME# disabled [ 0.732058] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.736033] pci 0000:00:0a.0: PME# disabled [ 0.740137] PCI: 0000:01:07.0 reg 10 32bit mmio: [e8000000, efffffff] [ 0.740142] PCI: 0000:01:07.0 reg 14 io port: [8000, 80ff] [ 0.740147] PCI: 0000:01:07.0 reg 18 32bit mmio: [f9000000, f900ffff] [ 0.740161] PCI: 0000:01:07.0 reg 30 32bit mmio: [0, 1ffff] [ 0.740171] pci 0000:01:07.0: supports D1 [ 0.740173] pci 0000:01:07.0: supports D2 [ 0.740191] PCI: 0000:01:07.1 reg 10 32bit mmio: [f0000000, f7ffffff] [ 0.740196] PCI: 0000:01:07.1 reg 14 32bit mmio: [f9010000, f901ffff] [ 0.740221] pci 0000:01:07.1: supports D1 [ 0.740222] pci 0000:01:07.1: supports D2 [ 0.740245] PCI: 0000:01:08.0 reg 10 io port: [8400, 847f] [ 0.740250] PCI: 0000:01:08.0 reg 14 32bit mmio: [f9025000, f902507f] [ 0.740266] PCI: 0000:01:08.0 reg 30 32bit mmio: [0, 1ffff] [ 0.740276] pci 0000:01:08.0: supports D1 [ 0.740277] pci 0000:01:08.0: supports D2 [ 0.740279] pci 0000:01:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.744034] pci 0000:01:08.0: PME# disabled [ 0.748051] PCI: 0000:01:0a.0 reg 10 32bit mmio: [f9024000, f90247ff] [ 0.748056] PCI: 0000:01:0a.0 reg 14 32bit mmio: [f9020000, f9023fff] [ 0.748081] pci 0000:01:0a.0: supports D1 [ 0.748083] pci 0000:01:0a.0: supports D2 [ 0.748085] pci 0000:01:0a.0: PME# supported from D0 D1 D2 D3hot [ 0.752034] pci 0000:01:0a.0: PME# disabled [ 0.756049] pci 0000:00:06.0: transparent bridge [ 0.760033] PCI: bridge 0000:00:06.0 io port: [8000, 8fff] [ 0.760036] PCI: bridge 0000:00:06.0 32bit mmio: [f8000000, f9ffffff] [ 0.760039] PCI: bridge 0000:00:06.0 32bit mmio pref: [e8000000, f7ffffff] [ 0.760069] PCI: 0000:02:00.0 reg 10 32bit mmio: [fb020000, fb03ffff] [ 0.760075] PCI: 0000:02:00.0 reg 14 32bit mmio: [fb000000, fb01ffff] [ 0.760080] PCI: 0000:02:00.0 reg 18 io port: [9000, 901f] [ 0.760097] PCI: 0000:02:00.0 reg 30 32bit mmio: [0, 1ffff] [ 0.760113] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.764034] pci 0000:02:00.0: PME# disabled [ 0.768056] PCI: 0000:02:00.1 reg 10 32bit mmio: [fb040000, fb05ffff] [ 0.768062] PCI: 0000:02:00.1 reg 14 32bit mmio: [fb060000, fb07ffff] [ 0.768068] PCI: 0000:02:00.1 reg 18 io port: [9400, 941f] [ 0.768084] PCI: 0000:02:00.1 reg 30 32bit mmio: [0, 1ffff] [ 0.768100] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold [ 0.772034] pci 0000:02:00.1: PME# disabled [ 0.776063] PCI: bridge 0000:00:0a.0 io port: [9000, 9fff] [ 0.776066] PCI: bridge 0000:00:0a.0 32bit mmio: [fa000000, fbffffff] [ 0.776080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.776588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.840228] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15) [ 0.846626] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.852233] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15) [ 0.858625] ACPI: PCI Interrupt Link [LNK4] (IRQs *5 7 9 10 11 14 15) [ 0.862627] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.870879] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.879425] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 *15) [ 0.886628] ACPI: PCI Interrupt Link [LNK8] (IRQs *5 7 9 10 11 14 15) [ 0.893552] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.901953] ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15) [ 0.909236] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15) [ 0.916474] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 *15) [ 0.922629] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.928162] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 *15) [ 0.934628] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15) [ 0.942403] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled. [ 0.950880] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 *15) [ 0.957953] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15) [ 0.965236] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15) [ 0.972292] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0 [ 0.977301] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. [ 0.984536] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0 [ 0.989300] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0 [ 0.996841] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled. [ 1.002310] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled. [ 1.006298] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0 [ 1.012292] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0 [ 1.017301] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0 [ 1.024991] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0 [ 1.030244] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled. [ 1.035239] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0 [ 1.038228] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0 [ 1.044991] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0 [ 1.050227] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled. [ 1.055240] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. [ 1.059241] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0 [ 1.062245] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0 [ 1.068988] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0 [ 1.074046] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.076051] pnp: PnP ACPI init [ 1.080039] ACPI: bus type pnp registered [ 1.088805] pnp: PnP ACPI: found 14 devices [ 1.092047] ACPI: ACPI bus type pnp unregistered [ 1.100050] PCI: Using ACPI for IRQ routing [ 1.128042] NET: Registered protocol family 8 [ 1.132032] NET: Registered protocol family 20 [ 1.136051] NetLabel: Initializing [ 1.140032] NetLabel: domain hash size = 128 [ 1.144032] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.148045] NetLabel: unlabeled traffic allowed by default [ 1.158323] tracer: 1286 pages allocated for 65536 entries of 80 bytes [ 1.160032] actual entries 65586 [ 1.164152] AppArmor: AppArmor Filesystem Enabled [ 1.168059] ACPI: RTC can wake from S4 [ 1.188055] system 00:01: ioport range 0x1000-0x107f has been reserved [ 1.192033] system 00:01: ioport range 0x1080-0x10ff has been reserved [ 1.196033] system 00:01: ioport range 0x1400-0x147f has been reserved [ 1.200033] system 00:01: ioport range 0x1480-0x14ff has been reserved [ 1.204033] system 00:01: ioport range 0x1800-0x187f has been reserved [ 1.208033] system 00:01: ioport range 0x1880-0x18ff has been reserved [ 1.212033] system 00:01: iomem range 0xd0000000-0xdfffffff could not be reserved [ 1.216037] system 00:02: ioport range 0x4d0-0x4d1 has been reserved [ 1.220033] system 00:02: ioport range 0x800-0x87f has been reserved [ 1.224033] system 00:02: ioport range 0x295-0x314 has been reserved [ 1.228033] system 00:02: ioport range 0x290-0x294 has been reserved [ 1.232042] system 00:0c: iomem range 0xe0000000-0xe7ffffff could not be reserved [ 1.236037] system 00:0d: iomem range 0xcd000-0xcffff has been reserved [ 1.240033] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 1.244033] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 1.248033] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 1.252033] system 00:0d: iomem range 0x7fff0000-0x7fffffff could not be reserved [ 1.256034] system 00:0d: iomem range 0xffff0000-0xffffffff could not be reserved [ 1.260033] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 1.264033] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 1.268033] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 1.272033] system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved [ 1.282226] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01 [ 1.284048] Switched to high resolution mode on CPU 0 [ 1.284052] pci 0000:00:06.0: IO window: 0x8000-0x8fff [ 1.288020] Switched to high resolution mode on CPU 1 [ 1.289432] pci 0000:00:06.0: MEM window: 0xf8000000-0xf9ffffff [ 1.295594] pci 0000:00:06.0: PREFETCH window: 0x000000e8000000-0x000000f7ffffff [ 1.303247] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 1.309236] pci 0000:00:0a.0: IO window: 0x9000-0x9fff [ 1.314615] pci 0000:00:0a.0: MEM window: 0xfa000000-0xfbffffff [ 1.320769] pci 0000:00:0a.0: PREFETCH window: 0x00000088000000-0x000000880fffff [ 1.328425] pci 0000:00:06.0: setting latency timer to 64 [ 1.328431] pci 0000:00:0a.0: setting latency timer to 64 [ 1.328433] bus: 00 index 0 io port: [0, ffff] [ 1.332942] bus: 00 index 1 mmio: [0, ffffffffffffffff] [ 1.338230] bus: 01 index 0 io port: [8000, 8fff] [ 1.342995] bus: 01 index 1 mmio: [f8000000, f9ffffff] [ 1.348196] bus: 01 index 2 mmio: [e8000000, f7ffffff] [ 1.353396] bus: 01 index 3 io port: [0, ffff] [ 1.357903] bus: 01 index 4 mmio: [0, ffffffffffffffff] [ 1.363190] bus: 02 index 0 io port: [9000, 9fff] [ 1.367957] bus: 02 index 1 mmio: [fa000000, fbffffff] [ 1.373156] bus: 02 index 2 mmio: [88000000, 880fffff] [ 1.378357] bus: 02 index 3 mmio: [0, 0] [ 1.382351] NET: Registered protocol family 2 [ 1.424127] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 1.432226] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.441569] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.448792] TCP: Hash tables configured (established 262144 bind 65536) [ 1.455478] TCP reno registered [ 1.468125] NET: Registered protocol family 1 [ 1.472665] checking if image is initramfs... it is [ 2.198798] Freeing initrd memory: 8424k freed [ 2.209096] audit: initializing netlink socket (disabled) [ 2.214577] type=2000 audit(1239131777.214:1): initialized [ 2.226010] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.236281] VFS: Disk quotas dquot_6.5.1 [ 2.240396] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.247208] msgmni has been set to 4016 [ 2.251257] io scheduler noop registered [ 2.255294] io scheduler anticipatory registered [ 2.260022] io scheduler deadline registered [ 2.264536] io scheduler cfq registered (default) [ 2.269432] pci 0000:00:05.0: Enabling HT MSI Mapping [ 2.274564] pci 0000:00:05.1: Enabling HT MSI Mapping [ 2.279694] pci 0000:00:05.2: Enabling HT MSI Mapping [ 2.284825] pci 0000:00:06.0: Enabling HT MSI Mapping [ 2.289959] pci 0000:00:06.1: Enabling HT MSI Mapping [ 2.295088] pci 0000:00:08.0: Enabling HT MSI Mapping [ 2.300218] pci 0000:00:0a.0: Enabling HT MSI Mapping [ 2.305343] pci 0000:01:07.0: Boot video device [ 2.305468] pcieport-driver 0000:00:0a.0: setting latency timer to 64 [ 2.305489] pcieport-driver 0000:00:0a.0: found MSI capability [ 2.311405] pci_express 0000:00:0a.0:pcie00: allocate port service [ 2.311467] pci_express 0000:00:0a.0:pcie03: allocate port service [ 2.360843] hpet_acpi_add: no address or irqs in _CRS [ 2.366033] Linux agpgart interface v0.103 [ 2.370199] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 2.376582] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.383425] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.391505] brd: module loaded [ 2.394722] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 2.402693] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.410759] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.415841] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.440690] mice: PS/2 mouse device common for all mice [ 2.446154] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.452341] rtc0: alarms up to one year, y3k [ 2.456731] cpuidle: using governor ladder [ 2.460899] cpuidle: using governor menu [ 2.465300] TCP cubic registered [ 2.468869] registered taskstats version 1 [ 2.473273] Magic number: 5:248:293 [ 2.473315] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 2.485701] tty ttyz7: hash matches [ 2.489261] tty ttywa: hash matches [ 2.492858] tty tty26: hash matches [ 2.496467] rtc_cmos 00:05: setting system clock to 2009-04-07 19:16:18 UTC (1239131778) [ 2.504635] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.510700] EDD information not available. [ 2.514899] Freeing unused kernel memory: 536k freed [ 2.520173] Write protecting the kernel read-only data: 4348k [ 2.650476] fuse init (API version 7.9) [ 2.675469] processor ACPI0007:00: registered as cooling_device0 [ 2.681737] processor ACPI0007:01: registered as cooling_device1 [ 3.072895] usbcore: registered new interface driver usbfs [ 3.078550] usbcore: registered new interface driver hub [ 3.084293] No dock devices found. [ 3.100370] usbcore: registered new device driver usb [ 3.105954] SCSI subsystem initialized [ 3.134975] libata version 3.00 loaded. [ 3.135594] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23 [ 3.141538] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23 [ 3.150149] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 3.150152] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 3.155628] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 3.163256] ehci_hcd 0000:00:02.1: debug port 1 [ 3.167941] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 3.167958] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfc006000 [ 3.180856] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 [ 3.187134] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 3.196628] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.204578] usb usb1: configuration #1 chosen from 1 choice [ 3.210333] hub 1-0:1.0: USB hub found [ 3.228555] hub 1-0:1.0: 10 ports detected [ 3.250778] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.337494] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 [ 3.343455] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22 [ 3.352054] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 3.352057] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 3.357648] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 3.365315] ohci_hcd 0000:00:02.0: irq 22, io mem 0xfc005000 [ 3.426683] usb usb2: configuration #1 chosen from 1 choice [ 3.432595] hub 2-0:1.0: USB hub found [ 3.436521] hub 2-0:1.0: 10 ports detected [ 3.545077] pata_acpi 0000:00:04.0: setting latency timer to 64 [ 3.545665] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21 [ 3.551627] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 3.560360] pata_acpi 0000:00:05.0: setting latency timer to 64 [ 3.560369] pata_acpi 0000:00:05.0: PCI INT A disabled [ 3.565689] sata_nv 0000:00:05.0: version 3.5 [ 3.565694] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21 [ 3.574241] sata_nv 0000:00:05.0: Using SWNCQ mode [ 3.579347] sata_nv 0000:00:05.0: setting latency timer to 64 [ 3.579711] scsi0 : sata_nv [ 3.582818] scsi1 : sata_nv [ 3.585985] ata1: SATA max UDMA/133 cmd 0xa400 ctl 0xa800 bmdma 0xb400 irq 21 [ 3.593390] ata2: SATA max UDMA/133 cmd 0xac00 ctl 0xb000 bmdma 0xb408 irq 21 [ 4.412044] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 4.436115] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168 [ 4.443271] ata1.00: ATA-6: WDC WD2500SD-01KCB0, 08.02D08, max UDMA/133 [ 4.450072] ata1.00: 488397168 sectors, multi 16: LBA48 [ 4.455543] ata1.00: Drive reports diagnostics failure. This may indicate a drive [ 4.463234] ata1.00: fault or invalid emulation. Contact drive vendor for information. [ 4.485469] ata1.00: configured for UDMA/133 [ 4.818312] ata2: SATA link down (SStatus 0 SControl 300) [ 4.823939] isa bounce pool size: 16 pages [ 4.828406] scsi 0:0:0:0: Direct-Access ATA WDC WD2500SD-01K 08.0 PQ: 0 ANSI: 5 [ 4.838979] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20 [ 4.845028] pata_acpi 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 4.853969] pata_acpi 0000:00:05.1: setting latency timer to 64 [ 4.853979] pata_acpi 0000:00:05.1: PCI INT B disabled [ 4.859401] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20 [ 4.868142] sata_nv 0000:00:05.1: Using SWNCQ mode [ 4.873224] sata_nv 0000:00:05.1: setting latency timer to 64 [ 4.873365] scsi2 : sata_nv [ 4.877597] scsi3 : sata_nv [ 4.881836] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xbc00 bmdma 0xc800 irq 20 [ 4.889172] ata4: SATA max UDMA/133 cmd 0xc000 ctl 0xc400 bmdma 0xc808 irq 20 [ 5.226317] ata3: SATA link down (SStatus 0 SControl 300) [ 5.558303] ata4: SATA link down (SStatus 0 SControl 300) [ 5.564439] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23 [ 5.570365] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23 [ 5.579072] pata_acpi 0000:00:05.2: setting latency timer to 64 [ 5.579083] pata_acpi 0000:00:05.2: PCI INT C disabled [ 5.584406] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 23 (level, low) -> IRQ 23 [ 5.592901] sata_nv 0000:00:05.2: Using SWNCQ mode [ 5.597889] sata_nv 0000:00:05.2: setting latency timer to 64 [ 5.598024] scsi4 : sata_nv [ 5.602236] scsi5 : sata_nv [ 5.606624] ata5: SATA max UDMA/133 cmd 0xcc00 ctl 0xd000 bmdma 0xdc00 irq 23 [ 5.613947] ata6: SATA max UDMA/133 cmd 0xd400 ctl 0xd800 bmdma 0xdc08 irq 23 [ 5.950303] ata5: SATA link down (SStatus 0 SControl 300) [ 6.282308] ata6: SATA link down (SStatus 0 SControl 300) [ 6.288070] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61. [ 6.296070] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22 [ 6.302199] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 22 (level, low) -> IRQ 22 [ 6.311040] forcedeth 0000:00:08.0: setting latency timer to 64 [ 6.311071] nv_probe: set workaround bit for reversed mac addr [ 6.828496] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:45:d2:18 [ 6.837079] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3 [ 6.848555] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16 [ 6.854508] e1000e 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16 [ 6.862929] e1000e 0000:02:00.0: setting latency timer to 64 [ 6.864459] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 6.870402] ohci1394 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 [ 6.928759] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f9024000-f90247ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 6.942296] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 6.948224] 3c59x 0000:01:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 6.956538] 3c59x: Donald Becker and others. [ 6.960959] 0000:01:08.0: 3Com PCI 3c905B Cyclone 100baseTx at ffffc20000336000. [ 7.042765] 0000:02:00.0: eth2: (PCI Express:2.5GB/s:Width x4) 00:15:17:0b:d4:9e [ 7.050395] 0000:02:00.0: eth2: Intel(R) PRO/1000 Network Connection [ 7.057000] 0000:02:00.0: eth2: MAC: 0, PHY: 4, PBA No: d50868-001 [ 7.064070] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16 [ 7.070170] e1000e 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16 [ 7.079023] e1000e 0000:02:00.1: setting latency timer to 64 [ 7.254704] 0000:02:00.1: eth3: (PCI Express:2.5GB/s:Width x4) 00:15:17:0b:d4:9f [ 7.262318] 0000:02:00.1: eth3: Intel(R) PRO/1000 Network Connection [ 7.268935] 0000:02:00.1: eth3: MAC: 0, PHY: 4, PBA No: d50868-001 [ 7.294467] pata_amd 0000:00:04.0: version 0.3.10 [ 7.294531] pata_amd 0000:00:04.0: setting latency timer to 64 [ 7.294775] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 7.306836] scsi6 : pata_amd [ 7.310014] scsi7 : pata_amd [ 7.313964] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 7.321177] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 7.332595] Driver 'sd' needs updating - please use bus_type methods [ 7.339363] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 7.349170] sd 0:0:0:0: [sda] Write Protect is off [ 7.354141] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.354220] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.363618] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) [ 7.371222] sd 0:0:0:0: [sda] Write Protect is off [ 7.376179] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 7.376221] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 7.385509] sda: sda1 sda2 < sda5 > [ 7.426467] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.492325] ata7.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66 [ 7.499131] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:600:0x13) [ 7.512275] ata7.00: configured for UDMA/66 [ 7.516635] ata8: port disabled. ignoring. [ 7.522712] scsi 6:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5 [ 7.533347] scsi 6:0:0:0: Attached scsi generic sg1 type 5 [ 7.566168] Driver 'sr' needs updating - please use bus_type methods [ 7.590882] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 7.597869] Uniform CD-ROM driver Revision: 3.20 [ 7.602734] sr 6:0:0:0: Attached scsi CD-ROM sr0 [ 7.705400] PM: Starting manual resume from disk [ 7.711182] PM: Resume from partition 8:5 [ 7.711183] PM: Checking hibernation image. [ 7.711349] PM: Resume from disk failed. [ 7.764276] kjournald starting. Commit interval 5 seconds [ 7.764291] EXT3-fs: mounted filesystem with ordered data mode. [ 8.212654] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0016e65600bcb82b] [ 13.737143] udevd version 124 started [ 14.185592] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00 [ 14.191624] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c80 [ 14.249682] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug? [ 14.369062] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 14.408608] ACPI: Power Button (FF) [PWRF] [ 14.412994] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 14.440533] ACPI: Power Button (CM) [PWRB] [ 14.621357] parport_pc 00:09: reported by Plug and Play ACPI [ 14.627228] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 15.396375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 15.617233] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 15.641510] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 15.947998] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21 [ 15.953956] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 21 (level, low) -> IRQ 21 [ 15.962653] HDA Intel 0000:00:06.1: setting latency timer to 64 [ 16.467544] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input5 [ 45.666998] lp0: using parport0 (interrupt-driven). [ 45.844819] Adding 6040400k swap on /dev/sda5. Priority:-1 extents:1 across:6040400k [ 46.153300] EXT3 FS on sda1, internal journal [ 46.564835] type=1505 audit(1239131822.987:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4134 [ 46.729103] type=1505 audit(1239131823.151:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4139 [ 46.729305] type=1505 audit(1239131823.151:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4139 [ 46.832792] ip_tables: (C) 2000-2006 Netfilter Core Team [ 47.293484] ACPI: WMI: Mapper loaded [ 47.607688] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00) [ 47.607754] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0xc [ 47.607758] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xe [ 47.607760] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 [ 48.453715] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 48.833031] NET: Registered protocol family 10 [ 48.834159] lo: Disabled Privacy Extensions [ 49.120333] ppdev: user-space parallel port driver [ 49.992773] QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard [ 49.994023] KQEMU installed, max_locked_mem=1028576kB. [ 50.784030] Clocksource tsc unstable (delta = -141387474 ns) [ 51.332416] Bluetooth: Core ver 2.13 [ 51.333956] NET: Registered protocol family 31 [ 51.333969] Bluetooth: HCI device and connection manager initialized [ 51.333976] Bluetooth: HCI socket layer initialized [ 51.352339] Bluetooth: L2CAP ver 2.11 [ 51.352353] Bluetooth: L2CAP socket layer initialized [ 51.373305] Bluetooth: SCO (Voice Link) ver 0.6 [ 51.373324] Bluetooth: SCO socket layer initialized [ 51.413577] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 51.413590] Bluetooth: BNEP filters: protocol multicast [ 51.438101] Bridge firewalling registered [ 51.438491] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. [ 51.461251] Bluetooth: RFCOMM socket layer initialized [ 51.461294] Bluetooth: RFCOMM TTY layer initialized [ 51.461298] Bluetooth: RFCOMM ver 1.10 [ 52.715280] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 52.715313] pci 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19 [ 53.138423] [drm] Initialized drm 1.1.0 20060810 [ 53.178230] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 53.771460] [drm] Setting GART location based on new memory map [ 53.771889] [drm] Loading R200 Microcode [ 53.772000] [drm] writeback test succeeded in 1 usecs [ 55.837354] ADDRCONF(NETDEV_UP): eth3: link is not ready [ 56.041325] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 56.050446] eth1_rename: setting half-duplex. [ 56.052983] ADDRCONF(NETDEV_UP): eth1_rename: link is not ready [ 56.324766] NET: Registered protocol family 17 [ 66.620026] eth0: no IPv6 routers present